Common faults and resolutions of treadmill II
Continued from the previous article, we will introduce more faults and resolutions of motorized treadmill.
Noise during exercise
Possible reasons:
1. The space between the cover and the running belt is too small, resulting in friction between the cover and the running belt;
2. It may be due to foreign bodies being caught between the running belt and the running board during exercise;
3. Running belt deviation is serious, and friction occurs on both sides of the running board;
4. Motor noise
Solution: 1. Correct or replace the cover; 2. Remove foreign objects; 3. Adjust the balance of the running belt; 4. Replace the motor.
Why can't the treadmill start
Possible reasons:
1. The power supply is not working;
2. The fuse is blown;
3. The switch of the electric treadmill is broken;
4. For other reasons, please contact our professionals.
Solution: 1. Please check the power supply; 2. Replace the fuse; 3. Replace the power switch.
The running belt of the treadmill appears to be off the belt
Possible reasons:
1. The front axle and the rear axle of the treadmill are unbalanced;
2. Because the running posture is not very standard during exercise, the left and right feet are exerted unevenly, which leads to the deviation of the belt.
Solution: Adjust the balance of the roller.
The motor is noisy when the electric treadmill is working.
Possible reasons:
1. The carbon brushes may be severely worn;
2. The motor rubs against nearby objects when it is running.
Solution: 1. Check or replace the carbon brush; 2. Remove foreign objects.
Turn on the power, turn on the power switch, and the power indicator does not light.
Possible reasons:
1. The three-phase plug is not inserted in place;
2. The wiring inside the switch is loose;
3. The three-phase plug is damaged;
4. The switch may be damaged;
Solution:
1. Try several times; 2. Open the upper shield to check whether the wiring is loose; 3. Replace the three-phase plug; 4. Replace the switch.
Buttons don't work.
Possible reasons:
1. The button is aging; 2. The button circuit board becomes loose;
Solution:
1. Replace the button; 2. Lock the button circuit board.

We will introduce more in next article.
